Công tắc hành trình OMRON X-10G Series

SKU: X-10 Series
Hãng sản xuất: Omron
Chất lượng: Mới 100%
Bảo hành: Chính hãng
Chứng từ: CO/CQ

Liên hệ

[devvn_quickbuy]

(Đơn giá chưa bao gồm chi phí vận chuyển)

Tham khảo bảng giá sản phẩm tại đây

ĐẶT MUA QUA ĐIỆN THOẠI

Terminals

Screw Terminals (-B)

Solder Terminal (-A)

(“-A” is not included in the model numbers.)

Note: 1. Tighten the terminal screws to a torque of 0.78 to 1.18 Nm.
2. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.
3. In case of DC voltage, set the COM to the positive terminal.

Mounting

Use M4 mounting screws with plane washers or spring washers to securely mount the Switch. Tighten the screws to a torque of 1.18 to 1.47 Nm.

The Switch can be panel mounted, provided that the hexagonal nut of the actuator is tightened to a torque of 2.94 to 4.9 Nm.

The models, illustrations, and graphics are for screw-terminal models. (The dimensions for models that are omitted here are the same as for pin-plunger models.)

Pin Plunger
X-10G-B

Slim Spring Plunger
X-10GS-B

Short Spring Plunger
X-10GD-B

Panel Mount Plunger
X-10GQ-B

Note: Do not use both the M12 mounting screw and the mounting holes in the case at the same time. Doing so will cause
stress to be applied to the Switch, possibly damaging the case or cover.

Panel Mount Roller Plunger
X-10GQ22-B

Note: Do not use both the M12 mounting screw and the mounting holes in the case at the same time. Doing so will cause
stress to be applied to the Switch, possibly damaging the case or cover.

Panel Mount Cross Roller Plunger
X-10GQ21-B

Note: Do not use both the M12 mounting screw and the mounting holes in the case at the same time. Doing so will cause
stress to be applied to the Switch, possibly damaging the case or cover.

Leaf Spring
X-10GL-B

Note: Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.

Please click image to enlarge (open in a new window).

* Be sure to use the switch at the rated OT value of 1.6 mm.

Short Hinge Lever
X-10GW21-B

Hinge Lever
X-10GW-B

Low-force Hinge Lever
X-10GW4-B

Short Hinge Roller Lever
X-10GW22-B

Hinge Roller Lever
X-10GW2-B

Reverse Hinge Lever
X-10GM-B

Reverse Short Hinge Lever
X-10GM22-B

Reverse Hinge Roller Lever
X-10GM2-B

Note: Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.

Please click image to enlarge (open in a new window).

Terminal Covers

AP-A

Soldering Terminal Use (Phenol Resin)

Note: The Cover has five thin, easy-to-separate portions for easy lead wire connections.

AP-B

Screw Terminal Use (Phenol Resin)

Note: The Cover has six thin, easy-to-separate portions for easy lead wire connections.

AP1-A

Soldering Terminal Use (Metal Press Mold)

Note: The Cover has five holes for easy lead wire connections.

AP1-B

Screw Terminal Use (Metal Press Mold)

Note: The Cover has six holes for easy lead wire connections.

AP-Z

Soldering or Screw Terminal Use (Vinyl Chloride)

Note: Each dimension has a tolerance of ±0.4 mm unless otherwise specified. (±0.8 mm for the AP-Z)

Separator

SEPARATOR FOR Z

Note: 1. Each dimension has a tolerance of ±0.4 mm unless otherwise specified.
2. The material is EAVTC (Epoxide Alkyd Varnished Tetron Cloth) and its heat-resisting temperature is 130°C.