Công tắc hành trình OMRON DZ-10G Series

Solder Terminals (-1A)

Screw Terminals (-1B)

The solder terminal model has a suffix “-1A” in its model number and its omitted dimensions are the same as the corresponding dimensions of the pin plunger model.

* Stainless-steel pin plunger

* Stainless-steel lever

* Stainless-steel lever

* Stainless-steel lever

* Stainless-steel lever

* Stainless-steel lever

* Stainless-steel lever

Note: Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.

Soldering Terminal Use (Phenol Resin)

Note: The Cover has five thin, easy-to-separate portions for easy lead wire connections.

Screw Terminal Use (Phenol Resin)

Note: The Cover has six thin, easy-to-separate portions for easy lead wire connections.

Soldering Terminal Use (Metal Press Mold)

Note: The Cover has five holes for easy lead wire connections.

Screw Terminal Use (Metal Press Mold)

Note: The Cover has six holes for easy lead wire connections.

Soldering or Screw Terminal Use (Vinyl Chloride)

Note: Each dimension has a tolerance of ±0.4 mm unless otherwise specified. (±0.8 mm for the AP-Z)

Note: 1. Each dimension has a tolerance of ±0.4 mm unless otherwise specified.
2. The material is EAVTC (Epoxide Alkyd Varnished Tetron Cloth) and its heat-resisting temperature is 130°C.

Hinge Lever
XAA-1

Hinge Roller Lever
ZAA-2

Short Panel Mount Plunger
ZAQ-3

Medium Panel Mount Plunger
ZAQ-2

Long Panel Mount Plunger
ZAQ-1

Panel Mount Roller Plunger
ZAQ-22